Benjamin Marauder Rifle (M-Rod)
M-Rod Front Shroud Extensions
The M-Rod Front Shroud Extensions are installed on the end of the factory shroud and finished with the endcap. They are machined to accept the two included delrin baffles, or can be used with OEM baffles. The baffles are machined specifically for each caliber. The extension will add about 3.5" to the length of the shroud.
M-Rod x 1/2"UNF Threaded Adapter with Cap
The M-Rod x 1/2" UNF Threaded Adapter with Cap is used to install your own LDC with female threads onto the end of the M-Rod shroud. The cap will protect the threads when your LDC is removed.
Adds 6" of length to the front of your M-Rod main airtube. Tubing is 4130 Cromoly and the connector is 4140 with a 11/16" hole through it. Comes complete with both o-rings. Total volume increase is 4.24 cubic inches of air.